Layout & Cam Engineering

1.   Strohm Cam milling machine.
2.   Tornos Cam layout device with assorted templates and fixtures.
      All required tooling made in-house for each job.

Tool Grinding

1.   Three (3), Clottu AB-175 Diamond Grinders with all attachments
      and grinding fixtures.
2.   Two (2), Tool makers microscopes

Swiss Automatics

1.   Six (6), R-125 Tornos with 13-Y drilling/threading units
2.   Ten (10), M-7 Tornos with 13-Y drilling/threading units
      Able to hold + or - .0003 on turning diameters.
      Max. dia .500"  Max length 2.750

Second Operations

1.   One (1), Swiss 2nd Operation Lathe
2.   One (1), DSM-59 2nd Operation Lathe
3.   Five (5), 3C Levin instrument lathes
4.   Three (3), Swiss screw slotters
5.   Ten (10), 14" Drill Presses with all attachments and assorted
      fixtures, for taping and threading.
6.   Three (3), Barker 2nd Operation Mills
7.   Two (2), Auto deburr machines

Deburr Departmart

1.   Four (4), Bench Drill Presses
2.   Six (6), Floor Drill Presses
3.   Four (4), Broaching Machines
4.   Four (4), Barrel Tumblers with assorted tumbling media
5.   Two (2), Vibration Tumblers
6.   Four (4), Mini-Tumblers

Inspection

   D.O.D. Qualified to M83513/05 Mil-Spec
   Conforms to MIL-I-45208A Standards
   Full S.P.C. on specified dimensions
   Q.C. Manual available upon request

1.   Four (4) 14" Mitutoyo contour projectors
2.   One (1), 14" ST contour projectors
3.   Six (6), S.P.C. DP-1HS processors
4.   Five (5), Microscopes - 40X
5.   Eight (8), Mitutoyo S.P.C. micrometers
6.   One (1), Rockwell tester
7.   Complete assorted inspection equipment (Calipers, thread gages,
      gage blocks, pin gages, etc...) Calibrated to Mil-Std-45662A.
      Where applicable.

Processes

   Passivation per SAE-AMS-2700
   Heat Treat & Anneal capabilities

1.   One (1), atmospherically controlled Heat Treat Furnace (nitrogen)
      Heat Treat temp. Max. 2000'
2.   One(1), Block Furnace Heat Treat temp. Max. 2000